Advice and tips for homeowners on how to best take care of their water heater from Water Heater Repair Tacoma WA.

Tacoma Water Heater Venting Options

Posted by on May 13, 2014 in Plumbing Repair Tacoma WA | 0 comments

The following ideas about correct water heater venting from Water Heater Repair Tacoma WA right here are shared in order for house owners to have a basic understanding of exactly how the different types of venting work. They are not planned to be how-to directions for house owners to perform themselves. The training and licensing of an expert plumbing repair service specialist is extremely essential.

In terms of venting, water heaters are typically vented in two methods; direct vent water heaters and power vent water heaters. So what is the main difference between the 2 styles of water heaters? A direct vent water heater vents the combustion gases created from the water heater’s burner directly to the atmosphere, while a power vent water heater eliminates them with the aid of a powered venting fan.

This video gives some tasks to perform to help see if your water heater is currently properly vented:

Direct Vent Tacoma Water Heaters

For direct vent water heater, the heat generated through the combustion procedure is made use of to warm the water. The exhaust gases are then moved to the beyond the house via the exhaust pipe or chimney.

As far as direct venting, it works with the process that heated air is lighter than cool air and in turn will rise normally due to the difference in buoyancy in between the hot and cold air. This is a good basic system that works well when the exhaust gases can be vented vertically. No extra power is needed, and in turn the overall hot water heating expenses are lower.

The following video explains in more detail the details of a direct vent system:

Power Vent Tacoma Water Heaters

Power vent water heaters uses a fan or blower to help in the removal of exhaust gases from the hot water heater. For areas that do not have access to a vertical vent or chimney, power vent water heater may be the only selection. With using a fan or blower, exhaust gases can be pushed with horizontal exhaust vent pipes.

The primary benefit of a power vent water heater then is the ability to locate the water heater away from a chimney. Or if there is no chimney available, to save cash by horizontally venting it to the exterior through inexpensive venting pipe rather.

The downsides of a power vent system against a direct vent heater are that power vent heaters will cost more at first due to the extra devices (fan/blower) required for the install. Also, one will likewise have to run a power line to the fan. This too, will include to the expense.

Another drawback is that the blower part of the water heater will require electrical power to operate. This will increase the hot water heating expenses throughout it’s life time, though not that much.

And lastly, the fan noise can be heard operating when the hot water heater is running. While it’s probably only a small concern, it’s something that ought to be seriously considered. Proper setup can assist to remove, or at the minimum reduce the majority of this.

Though there are some differences between the two types, it really depends on a homeowners specific situation, in regards to the where it will be installed, and the ability to have access to a vent path to the outside of the house.  Tacoma Water Heater Repair recommends taking a look at the ENERGY STAR info right here too in terms of the various energy efficiency ratings for the different types of sorts of heaters.

Enhanced by Zemanta

Sizing A New Tacoma Water Heater

Posted by on Apr 23, 2014 in Water Heater Replacement Tacoma WA | 0 comments

Shopping around for a new water heater? For many people, it is not the most fun type of shopping to do, and for many people it might not be the simplest. A lot of water heater repair companies will definitely do a great job of making good tips for ones alternatives. If one is inclined to do some more in depth research oneself, below are some links that will be helpful.

Energy Expense Calculators
The U.S. Department of Energy has an energy cost calculator for electric and gas type water heaters on its website that is useful. It might seem a little difficult, but one need to have the ability to fill out the majority of the fields and get an approximation of how much it will cost to run ones water heater.

Water Heater SizingWater Heater Repair Tacoma WA
Many of the manufacturers of water heaters have sizing calculators on their websites to identify what the appropriate size heater will be considering the quantity of water to be heated up at peak times of the day. Here are links to A.O. Smith  and Bradford White.

Many gas providers have nice tools on their websites to identify costs also. Contact your local gas or electric company to see what they have available. Also, here is a cool tool from the River Network in Portland, OR that will analyze the energy and greenhouse gas emissions for any location in the United States.

Don’t think twice to call Water Heater Repair Tacoma WA with any problems you may particularly have with determining the very best size water heater for your Tacoma home.

Check out our Water Heater Replacement Tacoma WA page too…

Using Technology to Rethink Water Heater Design

Posted by on Mar 17, 2014 in Water Heater Technology | 0 comments

There is a new water heater in town and it potentially might be the very best thing in new innovation in the water heater market in quite a very long time. It is from the ISI Technology company and definitely makes use of modern technology in its building. Combine smart grid technology and a heck of a tankless design and one gets the HEATWORKS MODEL 1.Water Heater Repair Tacoma WA

The company very swiftly more than surpassed its funding for the project this past February and is taking pre-orders for the system. So, needless to state, we have not gotten our hands on an unit to test it out, however it does look really promising.

According to Greg Tew of the School of Architecture + Design at Virginia Tech, “Water heaters, as most of us know them, have been around for more than 100 years, and rely on antiquated technology to deliver one of the most important amenities in the home. ISI has developed a much needed technological overhaul to the water heater that delivers the benefits homeowners demand. By delivering impressive levels of comfort, savings, reliability and connectivity, the HEATWORKS MODEL 1 brings the water heater into the modern, connected home.”

Here’s How it Works:
Instead of the traditional resistance heating elements, it makes use of modern electronic technology to directly heat water molecules with 2 graphite electrodes and the water’s own resistance. This kind of water heater makes many of the parts of traditional water heaters unneeded; less parts, less means of breakdown and potentially a longer life for the water heater. Like not requiring metal interior parts that will rust and create sediment in the tank holding the water; no anode rods that will end up being used up and put aluminum in the water; and no flow switches that may stop working. Oh, and it is WIFI compatible.

Unlike present tankless water heaters that require at least a specific amount of water flow to cause the heater to heat water streaming from a faucet, this will kick in at flow rates of .1 gallons per minute, which makes it an excellent suitable for low-flow faucets too. Also, another benefit over existing tankless water heaters is the voltage needed to run the unit. Numerous tankless designs need a relatively high voltage, and often times users need to update their existing outlet and/or circuit box to accommodate for the high electrical energy pull. However, the HEATWORKS has an auto-sensing feature so it can fit in with ones existing electric box, and the device can be adjusted with a screwdriver to set it differently.

With independent testing, the business has concluded that the MODEL 1 is up to 40 % more energy efficient than traditional water heaters and approximately ten % more water efficient than the common tankless water heater.

We waited to share this till the end – it is about the size of a football (12.5 inches by 6.5 inches) too, and can be set up anywhere.

One will probably need more than one to heat up the water in the whole home, however that would be a simple adequate fix or retrofit for the units Water Heater Repair Tacoma WA is thinking. Here is a link to a sizing graph ISI Technology has on their site.

Related Product Information:

Learning the Best Water Heater Temperature

Posted by on Mar 2, 2014 in Water Heater Repair Tacoma WA | 0 comments

Much has been discussed over exactly what is an ideal water heater temperature level setting. Lots of sources, consisting of ENERGY STAR, provide the energy saving elements of temperature levels of 120 degrees or lower. And yes, there are cost savings to be had, but reasonably for those whose existing setting is closer to the conventional factory preset temperature of 140 degrees.

On the other hand, not as many share information about the possibility of contracting Legionella bacteria with a lower setting, particularly with a temperature lower than 120 degrees. OSHA states some exceptional safety measures for preventing this.

Water Heater Repair Tacoma WA’s conclusions are that it is something that each household needs to weigh in terms of possible health concerns mostly. For those with children or with elderly individuals in the home, a higher setting can be a water scalding concern. On the other hand, those prone to contracting respiratory infections, a higher setting should be used.

Below is an infographic highlighting the different temperature level growth ranges of Legionella.

Water Heater Repair Tacoma WA

Check out our article on How to Remove Odors From a Tacoma Water Heater also.

How to Remove Odors from a Tacoma Water Heater

Posted by on Jan 22, 2014 in Water Heater Repair Tacoma WA | 0 comments

Though not an enjoyable smell Water Heater Repair Tacoma WA knows when one pours a glass of water or goes to shower and the water smells like rotten eggs, it can be corrected. Generally, the smell is because of excess bacteria that has established in the water tank. It can happen more frequently for homes that utilize a well or cities that utilize a well to provide the water.Water Heater Repair Tacoma

According to Soquel Creek Water District, the smell is the result of four factors that must all be present for the odor to develop. These factors include:

  • A high concentration of sulfate in the raw water
  • Sulfate reducing bacteria, non-toxic to humans (sulfate is reduced to a sulfide state by the bacteria)
  • Little or no dissolved oxygen in the water
  • Hydrogen (a component of water which may be present due to water conditions reacting with the anode)

Setting the temperature of the water heater at 140 degrees for higher ought to get rid of most if not all the germs. Though, it would be nice to have the settings around 120 degrees to conserve a little money on energy expenses.

Water Heater Repair Tacoma Water Odor Prevention Tips

There are two fundamental methods to insure water smell from water heater are not an issue.
1. Chlorination can get rid of the excess quantity of germs that has actually chosen to reside in ones water heater. With this, there are two means to procedure. The first is by carry out periodic flushing of the water heater with bleach. The second is to set up a chlorine feeder, which will permit one to not need to do the bleach flushes (though uncomplicated to do, just not the most enjoyable job).

2. A brand-new anode rode can help too, though might not be totally efficient. The jobs from 1. could still have to be carried out also. Check to see if both the cold and hot water scent, or if it is simply the hot water. If this holds true just for the hot water then it could be an indication that the annode rod is wearing out due to make use of. We will not go into detail below, however there are numerous various kinds of annode rods that can be utilized and each have their benefits. If one utilizes a water softener at home, this can quicken the life span of an annode rod too.

Let us know if you have any questions!

Pros and Cons of Tankless Water Heaters in Tacoma

Posted by on Jan 14, 2014 in Tankless Water Heater Repair Tacoma WA, Water Heater Repair Tacoma WA | 0 comments

A tankless water heater is in some cases called an “on demand” water heater because it does not hold hot water, but rather heats up water right at the faucet only when one needs it. Most water heaters are big cylinders that have a heating element and a water source attached. The huge cylindrical part of the water heater is the tank.Tankless Water Heater Repair Tacoma

tankless water heater by contrast is constructed of the heating element solely.

The much smaller tankless water heater when compared with a conventional water heater, is one of the first pros of opting to go tankless. Tankless water heaters do consist of a substantial cylinder that needs to be awkwardly carried down the basement stairs. Traditional water heaters commonly begin to leak from their large cylindrical tanks when they start to wear, triggering mess as well as damage to anything that is in the immediate vicinity.

This type of leakage is not a problem with a tankless water heater. Sediment problems and problems of water pureness that can end up being an interested in a standard water heater are likewise not a problem with a tankless water heater.

The most vital benefit of selecting a tankless water heater is that a tankless water heater will save in between 30% and 50% on electricity when compared with a conventional water heater. That savings means about $100 a year for a typical household.

A disadvantage though is, unless a tankless water heater is fitted with a specialized pump so that only hot water flows from the tap, it takes a minute for the heating element to heat the water after you turn it on. This indicates that you squander more water with a tankless water heater. In some areas where water is harder to come by than electrical energy, this can be a considerable downside, and will include to the quantity of time it takes to see a return on your tankless water heater, because the preliminary outlay will consist of the expense of the pump.

The preliminary expenditure of purchasing a tankless water heater is an additional considerable downside. Although costs are often marketed that start as low as $500, a $500 tankless water heater is not most likely to provide adequate water for a typical home. The preliminary expense is most likely to run into four figures with a tankless water heater, meanings it can take ten years to see substantial savings after considering the expense of purchase and setup.

Installation expenses can be an additional issue with tankless water heaters. Because tankless water heaters have how-powered burners, they typically have unique venting requirements that require expert installment rather of diy installment. This can include as much as $1000 to the cost of the tankless water heater itself.

Tankless water heaters likewise just heat one faucet at a time. For families that routinely have two hot water sources going at once (such as cleaning clothes and cleaning dishes), it might be a good idea to install more than on tankless water heater, which adds once again to the initial cost.

Tankless water heaters are capable of supplying constant hot water nonetheless, so despite the fact that you could have to set up more than one depending on your usage requires, with a tankless water heater you never ever have the problem of “running out” of hot water that you typically get with a standard hot water heater that stores currently heated water in a tank.

On the positive side, tankless water heaters could get a $300 federal tax credit and the future looks helpful for additional credits to urge the installment of these systems, so if you decide to choose a tankless water heater, you could have the ability to balance out a few of the costs through tax credits.

The bottom line when it comes to the benefits and drawbacks of tankless water heaters versus conventional water heaters is to take all initial costs into account, consisting of installation and an exact appraisal of the number of devices you will require and the amount of you can anticipate to save per year. Then element in any energy credits you can assert to offset the cost, and make your decision.

If you currently have a tankless heater and need some repairs or troubleshooting, or are thinking of installing one, don’t hesitate to check out our Tankless Water Heater Repair Tacoma WA page and contact us for more information.

Here are some other articles that discuss the benefits of tankless water heaters:

Water Heater Repair Tacoma WA Services Video

Posted by on Jan 11, 2014 in Plumbing Repair Tacoma WA, Water Heater Repair Tacoma WA | 0 comments

We just made a brand-new business video overview for Water Heater Repair Tacoma WA and we wished to share it with you today. Do not think twice to contact us for any plumbing repairs and installments that you could have to have performed at work or at home.